Unitekno AKWA 18 SMART PLUS S Manuel D'installation, D'utilisation Et D'entretien page 20

CAUTION
Do not use the appliance if it shows signs of damage (cracks, fractures),
if the power cord is damaged or if you suspect there may be some kind of
internal fault (for example if the appliance has been dropped).
Check the data plate located on the back of the product and check that
the supply voltage and the absorption are suitable for the system capacity.
Connect the appliance to an earthed socket.
Position the appliance correctly, as described in the "Positioning" chapter.
Do not position it on slopes or where it is not perfectly balanced. Do not
place the appliance on a surface that could be damaged by water. Do not
place anything on top of the appliance.
Some models must be installed by specialist personnel. Installation must
be performed to the highest standards of workmanship and must comply
with local regulations.
During normal use, a few drops of water may end up on the surface on
which the appliance is placed, even in the presence of the drip tray.
Do not place on surfaces that may be damaged by water.
The appliance is designed to be used in enclosed (indoor) spaces.
Do not immerse the appliance in water!
Do not clean with dripping cloths.
Disconnect the appliance from the electrical mains before cleaning or
performing maintenance for which no connection is required. Use original
spare parts only.
|
E N 20