Fender Acoustasonic-Pro Mode D'emploi page 26

Les langues disponibles

38.LED SCREEN - This LED screen dis-

plays the active DSP effect number.

3 9 .F X PRESETS - These buttons save

and recall four user-assigned eff e c t s

f rom the 100 effects listed below. To

save an effect, choose a favorite

e ffect with the select wheel.

and hold any desired FX preset button

until the LED screen blinks indicating

that your preset has been saved. To

recall a FX preset simply press and

release the desired button.

4 0 .SELECT - This data wheel selects

among the various on-board digital

e ffects. These effects will only be

h e a rd if the DSP send and re t u rn

knobs on the respective channels

a re turned up.

• NOTE: When switching ON your Acoustasonic Pro amplifier, the DSP automatically defaults to the #1 preset.

Below is a listing of the Acoustasonic Pro 's DSP effects. To choose among these various effects simply rotate the

select dial to the desired effect. Both the DSP send and DSP re t u rn knobs must be above their minimum positions in

o rder for any effect to be heard. Effects 00 thru 78 have the same effect set on both the instrument and mic chan-

nels. Effects 7 9 t h ru 9 9 have independent settings for the instrument and mic channels.

All manuals and user guides at all-guides.com

Pre s s