Machine Packaging; Preliminary Operations - Gaggia Brera 037RG Mode D'emploi

INSTALLATION
For your safety and the safety of oth-
ers, carefully follow the instructions
provided in the "Safety Regulations"
section.

Machine Packaging

The original packaging has been designed
and constructed to protect the machine
during transport. We recommend keep-
ing the packaging material for possible
future transport.

Preliminary Operations

• Remove the co ee bean hopper cover
and the drip tray with grill from the
packaging.
• Remove the co ee machine from the
packaging and position it in a place
that meets the requirements described
in the safety regulations.
• Place the drip tray with grill into its
appropriate seat on the machine. Make
sure it is fully inserted to its limit stop.
• Insert the co ee bean hopper cover.
Note: Insert the plug in the
machine and in the wall sock-
et only when indicated and check that
the power button is switched to "0".
Important note: Carefully
read the explanatory descrip-
tions of all the warnings the machine
displays to the user via the lights on
the control panel display (see section
"Display Warnings").
NEVER remove the drip tray
when the machine is turned
on. Wait a couple of minutes after
turning on/o , as the machine will be
carrying out a rinse/self-cleaning cy-
cle (see section "Rinse/Self-cleaning
Cycle").
• Remove the water tank from its seat.
• Rinse and ll it with fresh water mak-
ing sure that it is not lled exceeding
the MAX level indicated in the water
tank. Put the water tank back in its
seat.
Fill the tank only with fresh,
non-sparkling water. Hot wa-
ter or any other liquid may damage
the tank and/or the machine. Do not
turn on the machine when the tank
is empty: Make sure there is enough
water in the tank.
• Remove the co ee bean hopper cover.
Note: The hopper may be pro-
vided with different safety
features according to the regulations
of the country of use of the machine.
• Slowly pour the co ee beans into the
hopper.
Only coffee beans must be
put into the co ee bean hop-
per. Ground co ee, instant co ee or
any other object may damage the
machine.
• Replace the co ee bean hopper cover.
• Insert the plug into the socket on the
back of the machine.
• Insert the plug of the other end of the
cable into a wall socket with suitable
power voltage.
• 27 •