Secure Dishwasher In Cabinet Opening - KitchenAid W10275503B Instructions D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Secure Dishwasher in Cabinet
Opening
1
Double-check dishwasher
alignment in cabinet opening
Check that dishwasher is still level front-to-back and
side-to-side in cabinet opening.
2
Remove lower dish rack
and place towel
Open dishwasher door, remove lower dish rack, and
place towel over pump assembly and lower spray arm of
dishwasher. This will prohibit screws from falling into
pump area when securing dishwasher to countertop.
3
Secure dishwasher
screw to
side cabinet
NOTE: Do not drop screws into bottom of dishwasher.
Locate brackets on top of dishwasher and secure
dishwasher to countertop with two, #10 x ¹⁄₂" Phillips-head
screws (included). The dishwasher must be secured to
keep it from shifting when door is opened.
4
Check door clearance
Check that top of door does not contact screws,
brackets, or countertop. If it does, adjust leveling legs.
5
Check inner spacing
Open door and check that space between dishwasher
cabinet opening and tub is equal on both sides. If
spacing is not equal, loosen bracket screws secured
and shift tub. Tighten bracket screws.
23

Publicité

Chapitres

Table des Matières
loading

Table des Matières