Publicité
Les langues disponibles
Les langues disponibles
DRILL SAFETY WARNINGS
1. Hold power tool by insulated
gripping surfaces, when performing
an operation where the cutting
accessory may contact hidden wiring.
Cutting accessory contacting a "live"
wire may make exposed metal parts of
the power tool "live" and could give the
operator an electric shock.
SCREWDRIVER SAFETY
WARNINGS
1. Hold power tool by insulated
gripping surfaces, when performing
an operation where the fastener
may contact hidden wiring. Fasteners
contacting a "live" wire may make
exposed metal parts of the power tool
"live" and could give the operator an
electric shock.
GENERAL SAFETY
WARNINGS FOR BATTERY
PACK
1) WARNING: Risk of fire and burns. Do
not disassemble, heat above 100°C
(212°F), or incinerate. Do not expose
cells or batteries to heat or fire.
Avoid storage in direct sunlight.
2) Dispose of used battery promptly.
When disposing of secondary cells
or batteries, keep cells or batteries
of different electrochemical systems
separate from each other.
3) Keep battery out of reach of children
and in original package until ready to
use.
4) Never put batteries in mouth. If
swallowed, contact your physician or
local poison control center.
5) CAUTION – The battery used in
this device may present a risk of
fire or chemical burn if mistreated.
Replace battery with appropriate
(WORX) battery only. Use of another
battery may present a risk of fire or
explosion.
Drill / Driver
All manuals and user guides at all-guides.com
6) WARNING: Do not use a visibly
7) WARNING: Do not modify or attempt
8) BATTERY MUST BE RECYCLED
9) Do not short-circuit a cell or battery.
10) Do not subject cells or batteries to
11) Keep cells and batteries clean and
12) Do not maintain secondary cells and
13) Retain the original cell and battery
14) Do not use any charger other than
15) When possible, remove the battery from
16) Prevent unintentional starting. Ensure
17) Disconnect the battery pack from
damaged battery pack or appliance
as applicable.
to repair the appliance or the battery
pack as applicable.
Do not store cells or batteries
haphazardly in a box or drawer where
they may short-circuit each other
or be short-circuited by conductive
materials.
mechanical shock.
dry. Wipe the cell or battery terminals
with a clean dry cloth if they become dirty.
batteries on charge when not in use.
literature for future reference.
that specifically provided for use with
the equipment. Secondary cells and
batteries need to be charged before
use. Always use the correct charger and
refer to the manufacturer's instructions
or equipment manual for proper charging
instructions.
the equipment when not in use.
the switch is in the off-position before
connecting to battery pack, picking up
or carrying the appliance. Carrying the
appliance with your finger on the switch or
energizing appliances that have the switch
on invites accidents..
the appliance before making any
adjustments, changing accessories, or
storing appliance. Such preventive safety
measures reduce the risk of starting the
appliance accidentally.
9
EN
Publicité
