Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
TROUBLESHOOTING
1. WHY DOES THE DRILL NOT TURN ON
WHEN YOU PRESS THE SWITCH?
The Forward/Reverse Rotation Switch, which is
on top of the trigger, is positioned in the lock
function. Unlock the Forward/Reverse Rotation
Switch by putting it into the required rotation
position. Push the trigger and the drill will start
to rotate.
2. REASONS FOR DIFFERENT BATTERY
PACK WORKING TIMES
Charging time problems, and having not
used a Battery Pack (7) for a prolonged time
will reduce the Battery Pack working time.
This can be corrected after several charge and
discharge operations by charging & working
with your drill. Heavy working conditions such
as large screws into hard wood will use up the
Battery Pack energy faster than lighter working
conditions. Do not re-charge your Battery Pack
below 32°F (0°C) and above 113°F (45°C) as this
will affect performance.
3. THE BIT LOCK
SWITCH WILL NOT
TM
13
ROTATE.
Pull the trigger and have the drill rotate briefly.
The Bit Lock
Switch ring should release and
TM
operate as normal.
MAINTENANCE
Remove the battery pack from the tool
before carrying out any adjustment,
servicing or maintenance.
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your
power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust.
Occasionally you may see sparks through the
ventilation slots. This is normal and will not
damage your power tool.
Drill / Driver
EN
Publicité
