Segway ninebot KickScooter ES3 PLUS Mode D'emploi page 5

4 Assembling Your KickScooter
1. Unfold the stem and push it until you hear a
click. Flip up the folding pedal. Then unfold
the kickstand to support the scooter.
Note: Confirm that the latching axis on the
folding mechanism is secured correctly.
Latching Axis
3. Install six screws (two on each side) with the
included hex wrench.
1 4
3 2
06
2. Firmly connect the wires inside the handlebar
and the stem. Slide the handlebar onto the
stem. Be aware of the correct orientation.
Head light
face front
4. Verify that your KickScooter can be powered on
and off.
5 First Ride
There are safety risks when learning to ride the KickScooter. You must read the Safety
Instructions via the App before your first ride.
For your safety, your new KickScooter is not activated and will beep occasionally after Power
ON.
Until activated, the KickScooter maintains a very low riding speed, and can not be ridden
with full function. Install the App on your mobile device (with Bluetooth 4.1 or above),
connect to the KickScooter with Bluetooth, and follow the App instructions to activate your
KickScooter and enjoy the full performance.
Segway-Ninebot App Scan the QR code to download the App (iOS 9.0 or above, Android™ 4.3 or above).
Install the App and register/login.
1
Click "Vehicle"→"Scan for Vehicle" to connect to your
3
KickScooter.
The KickScooter will beep when the connection is
successful. The Bluetooth icon will stop blinking and
remain illuminated.
4 Follow the App instructions to active the KickScooter and learn how to ride safely.
You can now start to use your KickScooter, check the status with the App, and interact with other users. Have fun!
Power on the KickScooter. A blinking Bluetooth
2
icon indicates the KickScooter is waiting for a
connection.
Vehicle Fans Moments Discover Me
07