Beko GNE114612 X Mode D'emploi page 25

All manuals and user guides at all-guides.com
The freezer or cooler door may be ajar. >>>
Check that the doors are fully closed.
The product may be set to temperature too
low. >>> Set the temperature to a higher
degree and wait for the product to reach the
adjusted temperature.
The cooler or freezer door washer may be
dirty, worn out, broken or not properly settled.
>>> Clean or replace the washer. Damaged
/ torn door washer will cause the product to
run for longer periods to preserve the current
temperature.
The freezer temperature is very low, but
the cooler temperature is adequate.
The freezer compartment temperature is set
to a very low degree. >>> Set the freezer
compartment temperature to a higher degree
and check again.
The cooler temperature is very low, but
the freezer temperature is adequate.
The cooler compartment temperature is set
to a very low degree. >>> Set the freezer
compartment temperature to a higher degree
and check again.
The food items kept in cooler
compartment drawers are frozen.
The cooler compartment temperature is set
to a very low degree. >>> Set the freezer
compartment temperature to a higher degree
and check again.
The temperature in the cooler or the
freezer is too high.
The cooler compartment temperature is set to
a very high degree. >>> Temperature setting
of the cooler compartment has an effect on
the temperature in the freezer compartment.
Wait until the temperature of relevant parts
reach the sufficient level by changing the
temperature of cooler or freezer compartments.
The doors were opened frequently or kept open
for long periods. >>> Do not open the doors
too frequently.
The door may be ajar. >>> Fully close the
door.
The product may have been recently plugged
in or a new food item is placed inside. >>>
This is normal. The product will take longer
to reach the set temperature when recently
plugged in or a new food item is placed inside.
Large quantities of hot food may have
been recently placed into the product.
>>> Do not place hot food into the
product.
Shaking or noise.
The ground is not level or durable. >>>
If the product is shaking when moved
slowly, adjust the stands to balance the
product. Also make sure the ground is
sufficiently durable to bear the product.
Any items placed on the product may
cause noise. >>> Remove any items
placed on the product.
The product is making noise of
liquid flowing, spraying etc.
The product's operating principles
involve liquid and gas flows. >>> This is
normal and not a malfunction.
There is sound of wind blowing
coming from the product.
The product uses a fan for the cooling
process. This is normal and not a
malfunction.
There is condensation on the
product's internal walls.
Hot or humid weather will increase icing
and condensation. This is normal and
not a malfunction.
The doors were opened frequently or
kept open for long periods. >>> Do not
open the doors too frequently; if open,
close the door.
The door may be ajar. >>> Fully close
the door.
There is condensation on the
product's exterior or between the
doors.
The ambient weather may be humid,
this is quite normal in humid weather.
>>> The condensation will dissipate
when the humidity is reduced.
The interior smells bad.
24
EN