Publicité
Les langues disponibles
Les langues disponibles
1
General
1.1
Country specific standards
1.2
Security Information
1.3
Notes on graphics
Building Technologies
Fire Safety & Security Products
All manuals and user guides at all-guides.com
This document contains significant information on the commissioning of the control
unit. The detailed product documentation is contained in the following manuals:
009992 Safety Instructions
009930 Installer Manual
009905 Technical Reference Manual
009929 User Manual
Read the 'Safety Instructions' first before starting to work with the control
Warning
panel.
The manuals can be downloaded at:
www.siemens.com/homesecurity
This manual describes the functions corresponding to a general programmed setting of the control
panel. Nevertheless, the functions could be configured by the installer in a different way and there-
fore not be available.
The products are developed and produced in compliance with the relevant interna-
tional and European safety standards. Should any additional country-specific, local
safety standards or regulations apply in the place of operation, concerning project
planning, installation, operation and disposal of the product, then these standards
or regulations must be taken into account in addition to the safety regulations men-
tioned in the product documentation.
In the documentation, important information to be respected at any rate is marked
by the symbols indicated below. The additional signal word provides information on
the type of danger.
Keywords
WARNING
Danger; Warning; Caution designate the degree of endangerment.
Useful notes are indicated by the following symbol:
Important, indicates useful notes.
Instead of pictures, the text uses symbols for the designation of the buttons. The
example below shows the graphic representation in short form.
Used keys: Example
Button
Short form
<ARM>
Text example
Press button <ARM> on the keypad
General
5
08.2007
Publicité
