Publicité
Les langues disponibles
Les langues disponibles
Summary of the system main functions
6
Summary of the system main functions
Function
Keys
Full or Partition Arm
<CODE> & ◄┘
Full Arm
<ARM>
Disarm during exit
<ARM>
Disarm
<CODE> & ◄┘
Arm Partition
<A> or <B>
Arm Stay
<STAY> & <CODE> ◄┘
Arm Stay
>STAY>
Disarm Stay
<CODE> & ◄┘
Disarm Stay
<STAY>
Bypass
<BYPASS> & Zone# ◄┘
Initiate Panic
<♫> & <CTRL>
Initiate Medical
<♫> & <B>
Alarm
Initiate Fire Alarm
<A> & <B>
Memory
<UP> Arrow
Chime Enable/disable
<♫>
Control
<CTRL> & Device# ◄┘
Change or Add
<PROG> & <Master
Users code
CODE> ◄┘
Customize keypad
<CTRL> & <LEFT> arrow
Increase LCD backlight
<CTRL>&<STAY<
level
Decrease LCD backlight
<CTRL>&>BYPASS>
level
Increase Keypad button
<CTRL> & <UP>
backlight level
arrow
Decrease Keypad button
<CTRL> & <DOWN>
backlight level
arrow
Increase buzzer tone
<CTRL> & <A>
Decrease buzzer tone
<CTRL> & <B>
20
Building Technologies
Fire Safety & Security Products
All manuals and user guides at all-guides.com
The main functions of the system are listed in the table below.
Description
Initiates full arm
Initiates full arm
Disarms the system during the
exit delay
Disarms the system
Arms partition A or B
Initiates partial alarm when the
user is at home
Initiates partial alarm when the
user is at home
Disarms the system
Disarms the system
Bypasses the zone #
Activates emergency alert
Activates emergency alert
Activates emergency alert
Initiates display of events from
memory.
◄┘ Cancels memory readout
Enable or disable chime function
Activates or deactivates outputs
and devices
Activates program mode to add
or change user codes
Enters Local Edit Program mode
Hold <>CTRL and press <STAY>
repeatedly to increase light
Hold <CTRL> and press <BY-
PASS> repeatedly to decrease
light
Hold <CTRL> and press <UP>
arrow repeatedly to increase light
Hold <CTRL> and press
<DOWN> arrow repeatedly to
decrease light
Hold <CTRL> and press <A>
repeatedly to increase buzzer
tone
Hold <CTRL> and press <B>
repeatedly to increase buzzer
tone
Summary of functions
Tab. 6
When an operation has started incorrectly, press <ENTER> ◄┘ to exit and return to the previous
mode.
Pressing the <PROG> key for 2 sec returns back to the basic position.
Notes
Only if enabled by installer
Only when slow beeping is emitted
Stopping alarms
Press A or B for
2 seconds to arm the partition in account –
only if enabled by installer
Only if enabled by installer
Repeats the procedure to un-bypass
zones
Press simultaneously during 2 seconds
Press simultaneously during 2 seconds
Press simultaneously during 2 seconds
Displays events and automatically scrolls
to the next event after 2.5 sec. (Use arrow
key to scroll manually)
Holds the key for 2 sec to alternate. Only if
enabled by installer
Press <CTRL> for 2 seconds
Press <CONTROL> and then <ARM> and
hold both simultaneously for 2 sec
08.2007
Publicité
