Husqvarna K1 PACE Notice D'utilisation page 5

Product overview K1 PACE Rail
27
2
1
1. Power trigger lockout
2. Power trigger
3. Adjustment handle for blade guard
4. Blade guard
5. Cutting blade
6. Installation point for rail fixture on the right side
7. Flange for abrasive blade, spindle, arbor bushing
8. Spindle direction of rotation
9. Installation point for rail fixture on the left side
10. Front handle
11. Control panel
12. On/Off button
13. Accessories On/Off button (not used)
14. Rear handle
15. Battery release button
16. Battery slot
17. Motor air intake
18. Power cutter lock handle
19. Rail lock handle
20. Rail attachment
21. Belt guard
22. Type plate
23. Ground support front
24. Combination wrench
25. Battery (not included)
26. Battery charger (not included)
27. Operator's manual
1598 - 006 - 06.09.2023
3
21
22
23
24
4
5
7
6
20
19
26
25
Symbols on the product
11
8
9
10
18
17
16
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
Read the operator's manual carefully
and make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
Personal protective
protection. Refer to
equipment on page 12 .
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Always provide for
good ventilation.
Sparks from the cutting blade can cause
fire in fuel, wood, clothes, dry grass or
other flammable materials.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and understand
the instructions in the manual before using
Kickback on page
the product. Refer to
20 .
12
13
14
15
5