System Control; Specifications; Serial Number - Mitsubishi Electric PUHZ-W AA Série Manuel D'installation

8. System control

Set the refrigerant address using the DIP switch of the outdoor unit.
SW1 Function Setting
Refrigerant
SW1 Setting SW1 Setting
address
ON ON
00
OFF OFF
3 4 5 6 7 3 4 5 6 7
ON ON
01
OFF OFF
3 4 5 6 7 3 4 5 6 7
ON ON
02
OFF OFF
3 4 5 6 7 3 4 5 6 7

9. Specifications

Outdoor model
Power supply V / Phase / Hz
Dimensions (W x H x D) mm
Sound Power Level *1 (Heating) dB(A)
*1 Measured under rated operation frequency.

10. Serial number

■ The serial number is indicated on the SPEC NAME PLATE.
Sequential number for each unit: 00001–99999
Month of manufacture: A (1), B (2), C (3), D (4), E (5), F (6), G (7), H (8), J (9), K (10), L (11), M (12)
Year of manufacture (western calendar) : 2017 → 7, 2018 → 8
10
Note:
a) Up to 6 units can be connected.
b) Select one single model for all units.
c) For Dip switch setting for indoor unit, refer to the indoor unit's installation
Refrigerant
manual.
address
03
04
05
PUHZ-W60VAA PUHZ-W85VAA
230 / Single / 50
58
PUHZ-W112VAA PUHZ-W85YAA
400 / Three / 50
1050 x 1020 x 480
60 58
PUHZ-W112YAA
60