Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
DOOR REVERSE
Users can change the direction of opening according to one's own needs. The concrete
operating sequence is as follows:
1. Disconnect the appliance from the power supply (unplug).
2. Slightly tilt the appliance back and secure it in this position. Do not tilt the appliance more than
45°!
3. Take off the cover (1). Remove the four screws (2) (3) and take away the top.
4. Remove the two screws (4) that hold the upper hinge (5) and take away the upper hinge (5).
5. Unscrew the nut (7) and take off the bolt-pin (6). Reverse the up hinge (5) and install the bolt-pin
(6) and nut (7).
6. Lift the door and place it on a padded surface to prevent scratching it.
7. Take off the leg (8). Remove the three screws (9) that hold the lower hinge (10) and take away
the lower hinge (10).
8. Unscrew the screw (12) and remove the leg (13). Then transfer it to right side.
9. Remove the bolt-pin (11) and reverse the direction of lower hinge (10). Install the lower hinge (10)
into left side with three screws (9).
10. Insert the bolt-pin (11) to the lower hinge (10). 11. Remove the hinge pin (14) (15) (16) that is in
the bottom of door. At the other side of door, insert the replacement hinge pin that is supplied with
the appliance.
12. Set the door to its place and make sure the door seat at the lower hinge (10).
13. Fix the upper hinge (5) with the two screws (4). 14. Install the top with four screws (2) (3)
and cover screw (2) with cover (1).
-9-
Publicité
