SOUNDMASTER NR920DBR Mode D'emploi page 9

DAB+ mode
1.DLS Information
2.Program Type
3.Signal Strength
4.Multiplexer name
5.Frequency
6.Audio Bit Rate
7.Time and Date
DLS (Dynamic Label Segment): This is a scrolling message giving real-time information –
song titles, news headlines, or detail of the program and is provided by the broadcaster.
Audio Bit Rate: This displays the digital audio bit rate being received.
Program Type: This describes the style of the program being broadcast
Multiplex number.
3. System Reset
1. Press MENU button and rotate the TUNNING button to select "System Reset".
2. Press ENTER when prompted to perform the system reset.
The radio will return to DAB mode and perform an initial DAB+ scan on start-up.
Note: Any presets or setting stored will be permanently deleted.
4. Prune
You may remove all unavailable stations from the list.
1. In DAB mode Press MENU button and rotate the TUNING button to select "Prune".
2. Press ENTER button to confirm.
SPECICATIONS
Frequency Range: FM 87.5 - 108 MHz
DAB: 174 -340 MHz
Power Supply: AC 230V ~ 50Hz
DC 6V
Specifications are subject to change without further notice.
FM mode
1. RDS Information
2. Program Type
3. Signal Strength
4. Channel Frequency
5. Audio Mode
6. Time and Date
(UM-2 x 4)
EN-5
NR920 / English Instruction Manual