Thermador Masterpiece CIT367YGS Mode D'emploi page 22

en-us Operation
Automatic panel lock
This function automatically activates the panel lock when
you switch off the cooktop.
The automatic panel lock can be activated in the basic set-
tings → Page 22 .
6.14 Wipe protection
With this function you can avoid changing the settings
while cleaning the control panel during cooking.
This function does not lock the main switch. You can turn
the cooktop off at any time.
Activating wipe protection
Touch LOCK.
▶
The indicator above LOCK lights up.
a
The control panel is locked for 35 seconds.
a
After 30 seconds a beep indicates that the wipe protec-
a
tion is about to turn off.
Deactivating wipe protection
Touch LOCK.
▶
The indicator above LOCK goes out.
a
6.15 Basic settings
You can configure your appliance to meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display Function
Panel lock
– Manual 1
– Automatic
– Function deactivated
Signal tones
– Confirmation signal and error signal are
off. The main switch signal remains on.
– Only error signal is on.
– Only confirmation signal is on.
– Confirmation signal and error signal are
on. 1
Display energy consumption
– Deactivated.
– Activated.
Duration of timer end signal
– 10 seconds
– 30 seconds
– 1 minute
1 Factory setting (may vary according to model)
2
The cooktop's maximum power output is shown on the
rating plate
22
All manuals and user guides at all-guidesbox.com
1
1
Display Function
⁠ ⁠ Power management function. Limiting the to-
tal power of the cooktop. The available set-
tings depend on the maximum power of the
cooktop.
– Deactivated
– 1.000 W minimum power
– 1.500 W
...
– 3.000 W recommended for 13 A
. – 3.500 W recommended for 16 A
– 4.000 W
. – 4.500 W recommended for 20 A
...
or . – Maximum power of the cooktop
Changing the preset power levels for Heat-
Shift®
- Preset power level for the front cooking
zone.
- Preset power level for the middle cook-
ing zone.
- Preset power level for the rear cooking
zone.
Results for suitability test for cookware
– Not suitable.
– Not ideal.
–Suitable.
Configuring status of Liberty® cooking zone
when the cooktop is turned on
– As two independent cooking zones
– As a joined cooking zone.
Restore factory settings
– Off 1
– Restore appliance to factory settings
1 Factory setting (may vary according to model)
2
The cooktop's maximum power output is shown on the
rating plate
Changing the basic settings
Requirement: The cooktop is turned off.
Turn on the cooktop.
1.
Within the next 10 seconds, press KITCHEN TIMER for
2.
about 4 seconds.
The first four displays provide the product information.
To call up the individual displays, touch the control
panel.
Product information
Customer Support index (CI)
Production number
Production number 1
Production number 2
1 , 2
2
1
Display
⁠ .