Publicité
Les langues disponibles
Les langues disponibles
BREAKER
D25881
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Frequency
Power Input
No‑Load Beats Per Minute
Single Impact Energy (EPTA)
Variable Speed Dial
Variable Speed Dial Positions
Chisel Positions
Dust Extraction Shroud
Tool Holder
Weight (including side handle)
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
The term "power tool" in the warnings refers to your
WALT one of the
e
mains‑operated (corded) power tool or battery‑operated (cordless)
power tool.
1) Work Area Safety
D25881
a ) Keep work area clean and well lit. Cluttered or dark
V
220–240
AC
b ) Do not operate power tools in explosive
1
Hz
50/60
W
1600
bpm
1060–2160
c ) Keep children and bystanders away while operating
J
17.5
2) Electrical Safety
Yes
7
a ) Power tool plugs must match the outlet. Never
12
DWH051
SDS max®
kg
10.4
b ) Avoid body contact with earthed or grounded
c ) Do not expose power tools to rain or wet conditions.
d ) Do not abuse the cord. Never use the cord for
e ) When operating a power tool outdoors, use an
f ) If operating a power tool in a damp location is
3) Personal Safety
a ) Stay alert, watch what you are doing and use
b ) Use personal protective equipment. Always wear eye
c ) Prevent unintentional starting. Ensure the switch
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
areas invite accidents.
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
a power tool. Distractions can cause you to lose control.
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
Water entering a power tool will increase the risk of
electric shock.
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
protection. Protective equipment such as a dust mask,
non‑skid safety shoes, hard hat or hearing protection used
for appropriate conditions will reduce personal injuries.
is in the off position before connecting to power
English
3
Publicité
