Kopp Free-control Mode D'emploi page 39

GB
Technical Data
Supply voltage
Battery
Battery life
Transmit frequency
Transmit power
Range
Number of channels
Operating
temperature
Degree of protection
Conformity
Download the
declaration of
conformity at
170120_KOPP_BA_05873300_FC_Funk-Handsender_mini.indd 39
3 VDC
1 x CR2016
approx. 2.5 to 3 years
(at 20 switch
operations per day)
868.3 MHz
< 10 mW
approx. 150 m free-field
1 to 4
min. -5 °C to +55 °C
IP 20
R&TTE (EU & EFTA)
www.kopp.eu
Programming (brief instructions)
Assigning the radio transmitter to a radio
receiver:
1. Connect the radio receiver to the power
2. Press the PROG button of the radio
receiver with the enclosed programming
pin for approx. 2 seconds until the LED
lights up (red)
3. Learning mode is now active for
20 seconds.
4. Then press the desired button for the "On"
button of your mini handheld radio
transmitter.
5. Then press the desired position for the
"Off" button of the mini handheld radio
transmitter.
6. Finished – The mini handheld radio
transmitter is coupled with radio receiver.
if only one button is pressed in programming
mode, the receiver is programmed in 1 button
mode.
39
20.01.2017 09:34:12