Télécharger Imprimer la page

Kopp Free-control Mode D'emploi page 32

Mini émetteur manuel radio
Masquer les pouces Voir aussi pour Free-control:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

GB
D
Bedieningshandleiding
NL
Radio-handzender Mini
Mode d'emploi
F
Mini émetteur manuel radio
Operating instructions
GB
Radio transmitter mini
Bruksanvisning
S
Funk-Handsender Mini
Introduction
You have decided in favour of a high-quality
product that has been manufactured with
the utmost care. Only proper installation and
commissioning can ensure long, reliable and
fault-free operation. This manual contains
important information on commissioning
and handling. Please read carefully!
Keep the manual in a safe place for future
reference. This appliance meets the require-
ments of the applicable European and nation-
al regulations and is approved for use in the
EU and EFTA States.
32
170120_KOPP_BA_05873300_FC_Funk-Handsender_mini.indd 32
Bedienungsanleitung
Funk-Handsender Mini
You can find the declaration of conformity,
further information, applicat on examples,
02-11
product overview and instruction manual at:
www.kopp.eu
12-21
Liability or any further claims, in particular
for compensation for injury to persons or
damage to property caused by the device due
22-31
to missing or faulty functions are excluded.
Changes due to technical progress, changes
in
standards,
32-41
processes or design changes are expressly
reserved.
Please note the rules of electrical engineering
42-51
and compliance with the technical data!
Please ensure and check that the device is
switched off before beginning workDo not
connect any devices which require supervised
operation.
Do not make any changes to the devices.
The radio transmission takes place on a non-
exclusive, available frequency channel at
868.3 MHz.
Therefore, faults cannot be completely ruled
out.
However, the appropriate design ensures that
maximum transmission security is achieved.
Not suitable for safety applications, e.g.
EMERGENCY STOP, EMERGENCY CALL.
modified
manufacturing
20.01.2017 09:34:09

Publicité

loading