Kopp Free-control Mode D'emploi page 35

GB
Planning tips
• Before installing, carry out an on-site
inspection in order to plan the best
possible installation. Answer the question
for yourself: What must/should be
installed where?
• Try to find any sources of interference and
assess the security of transmission.
(see Background Info)
• Use theintegrated field strength detector
of any Free-control radio receiver (UP) to
determine and assess the radio reception
quality before completing installation.
• If, as you move through the display of the
field strength detector, you determine that
the radio signal is not reaching the radio
receiver at a sufficient strength, then
select a different installation location.
• Perform a radio test under practical
conditions. (open/closed windows/doors;
electrical consumers on/off; etc....)
• Only complete the desired installation
after successfully completing a radio test.
• Please note that Free-control radio
receivers cannot be operated in parallel
with conventional switches/buttons.
170120_KOPP_BA_05873300_FC_Funk-Handsender_mini.indd 35
Maintenance-free
A free-control installation is maintenance-
free.
The batteries of the battery-operated partic-
ipant only have to be replaced from time to
time. (See recommendation under "Technical
Data")
Recommendation: In the case of complex
switches/installations,
replacing the batteries of all radio trans-
mitters at the same time as soon as the
battery of the first participant have to be
replaced because the batteries are empty.
we recommend
35
20.01.2017 09:34:09