ARCHEON EOlife X Instructions D'utilisation page 18

EOlife X device failure
If there is a device failure, EOlife X will be unusable: the screen switches off (or no longer comes on) and the red LED in
the top right corner of the screen comes on .
See "XI . Troubleshooting" .
EN
f) Automatic shutdown
If there is no user action (a press of the physical ON/OFF button, a touch of the screen when the device is running
or the detection of the inspiration phase when a ventilation sequence is running .) for 1 hour, the device turns itself
off completely .
To turn the device on again, simply press the physical ON/OFF button .
2. EOlife X device set-up screen
a) Set-up screen display
1. Start up EOlife X by pressing the physical ON/OFF button .
2. Press normally on the physical ON/OFF button to show the summary screen .
3. Next, select the [wrench
Summary screen
18
Summary screen
] to display the EOlife X set-up screen .
To set
the date
Device
settings
Set-up screen
To set
the time
Language
selection
Access to main
information
Data transfer