Kohler K-6956 Instructions D'installation page 4

Dispenser
2. Dispenser Installation
Apply a bead of plumbers putty or other sealant to the underside
of the dispenser flange according to the putty manufacturer's
instructions.
Starting from the left front side of the lavatory, there are five
mounting holes (Hot-Spout-Cold-Dispenser-Handspray). Insert
the dispenser into the fourth hole from the left.
From the underside of the lavatory, slide the locknut onto the
dispenser shank. Tighten the locknut until the dispenser is
securely installed onto the lavatory.
Thread the bottle onto the dispenser shank.
Remove any excess putty or sealant.
116572-2-BB
Flange
Apply
Plumbers
Putty.
Locknut
Bottle
4 Kohler Co.