Installation; Electrical Connection; Connecting The Pumpset; Installation Of The Bottle Holder - Ardo CARUM Mode D'emploi

en

4.2. Installation

4.2.1. Electrical connection

• Outlet operation: Insert power cord (A) into the Carum (B) input
socket and connect the local power plug to the wall outlet.
• Battery operation: Before using the battery for the first time,
connect the unit to an outlet for 6 hours.
• The Carum can be used at maximum vacuum and maximum
cycles for eight hours (24 x 20 minutes).

4.2.2. Connecting the Pumpset

Use of the Pumpset is detailed in the separate user manual:
Ardo Pumpset.
• To use the single Pumpset:
Attach the tube connector (C) to the unit (D).
• To use the double Pumpset:
Attach the tube connector to the unit.
• The second opening of the tube connector (E)
remains closed – by single and double pumping.

4.2.3. Installation of the bottle holder

The bottle holder can be placed so as to be freestanding, or attached
to the rear of the Carum.

4.2.4. Installation of the Easy Freeze holder

The Easy Freeze holder is used for suspending the pumpsets with
breast milk storage bag or bottle. It is inserted at the rear of the
Carum instead of the bottle holder.
8
B
D
E
A
C