Worx WX311 Notice Originale page 8

ADDITIONAL SAFETY
POINTS FOR YOUR DRILL
1. Wear ear protectors when impact
drilling. Exposure to noise can cause
hearing loss.
2. Use auxiliary handles supplied with
the tool. Loss of control can cause
personal injury.
3. Hold power tools by insulated
gripping surfaces, when performing
an operation where the cutting
accessory may contact hidden wiring
or its own cord. Cutting accessory
contacting a "live" wire may make
exposed metal parts of the power tool
"live" and could give the operator an
electric shock.
4. Do not use the drill near water.
5. Do not use the drill as a screwdriver.
6. Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
8
7. Fully unwind extension cords to avoid
potential overheating.
8. When an extension cord is required you
must ensure it has the correct ampere
rating for your power tool and that it is in
a safe electrical condition.
9. Ensure your supply voltage is the same as
your tool rating plate voltage.
10. Your tool is double insulated for additional
protection against a possible electrical
insulation failure within the tool.
11. Always check walls and ceilings to avoid
hidden power cables and pipes.
12. After long working periods, external metal
parts and accessories could be hot.
13. Wear eye protection when operating this
tool.
14. Maintain a firm grip on the handle when
you are working. Always use the auxiliary
handles supplied with the tool. Loss of
control can cause personal injury.
Impact drill
All manuals and user guides at all-guides.com
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products must
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
local authorities or retailer for
recycling advice.
EN