Klarstein 10017164 Mode D'emploi page 12

Les langues disponibles

Warning:

Length of exhaust pipe according to the machine features, please don't replace or lengthen it freely,

otherwise errors will be easily caused.

Note: extreme length of unfolding exhaust pipe is 1500mm, please shorten the length as much as pos-

sible and keep it level as much as possible when installing.

Front side

1. Handle

2. Control Panel

3. Screen

4. Air-outlet

5. Fan blade

6. Castor

Back Side

7. Filter frame upper

8. Exhaust Connector

9. Exhaust Pipe

10. Power Cord Location

11. Filter frame lower

12. Rubber plug

13. Plug cap

Check packing accessories, read user's manual to get how to use them. (ﬁ g.4)

1. Exhaust Pipe

2. Adapter

3. Remote control

4. Sealplate

Control Panel

1. POWER: press this key to turn on/off machine. After machine turns on, default value is cooling

mode with low fan speed.

2. MODE: after machine turns on, press this key to select cooling, dehumidifying and fan mode.

3. FAN: after machine turns on, press this key to select fan speed (high and low).

4. DOWN: under cooling mode, press this key to downward setting temperature from 16~31℃.

5. UP: under cooling mode, press this key to upward temperature from 16~31℃.

6. SLEEP: under cooling mode, press this key to turn on/off sleeping function.

7. TIMER: under power-on or standby mode, press this key to setup on/off time from 1~24.

Parts Name

5. Drain connector

6. Drain pipe ( ID: 10mm)

10017167