Fortec Star DVB-786v3 Mode D'emploi page 18

NOTE: If you delete a satellite then wish to restore it, you have to reinstall the receiver using the Master Reset function.
3. TO RENAME A SATELLITE
Press OK on 'Rename' and the cursor will move to list. Press CH or PAGE up / down and select the satellite you want to rename.
Then press OK on that satellite. The menu will change as shown below. Follow the instructions as indicated. After pressing ESC,
the new satellite name will be entered. When finished, press ESC and select STORE and press OK.
4. TO SORT SATELLITE LIST ALPHABETICALLY
Press OK on 'Sort'. After sorting select STORE and press OK.
To edit TP
To add, delete, rename or sort TP list:
•
Freq --- Use 0-9 buttons and enter the frequency for that TP.
•
Polarity --- Press VOL up / down to change polarity.
•
S / R --- Use 0-9 buttons and enter symbol rate for that TP.
•
FEC --- Press VOL up / down and select forward error correction (FEC). If you do not happen to know the FEC value then
select 'Auto'. Press ESC, then select STORE and press OK.
This TP will be called up when performing the channel search.
2. TO DELETE A TP
Press OK once on 'Delete' and the cursor will move to list. Press CH or PAGE up / down and select the TP you want to delete.
Then press OK on that TP. When finished, press ESC and select STORE and press OK.
3. TO RENAME A TP
Press OK on 'Rename' and the cursor will move to list. Press CH or PAGE up / down and select the TP you want to rename.
Then press OK on that TP. The menu will change as shown below. Follow the instructions as indicated. After pressing ESC, the
All manuals and user guides at all-guides.com
EDIT MENU: SATELLITE / TP EDIT
In the EDIT menu, select 'Satellite / TP Edit' and press OK. Press CH down once.
1. TO ADD A SATELLITE
Press OK on 'Add' and the menu will change as shown below. Follow the
instructions as indicated. After pressing ESC, the new satellite name will be entered
at the bottom of the list. After adding a satellite, press ESC and select STORE and
press OK.
2. TO DELETE A SATELLITE
Press OK once on 'Delete' and the cursor will move to the list. Press CH or PAGE
up / down and select the satellite you want to delete. Then press OK on that
satellite. After deleting, press ESC and select STORE and press OK.
ADD or RENAME a satellite
Press CH up / down to move up and down the lines.
Press VOL up / down to move within the line.
Press OK on the letter to enter.
After naming, press ESC.
EDIT MENU: SATELLITE / TP EDIT
In EDIT menu select 'Satellite / TP Edit' and press OK. Press VOL down once to
change to the TP menu. Then press CH down once.
1. TO ADD A TP
Press OK on 'Add' and the menu will change as shown below. Follow the
instructions as indicated. After pressing ESC, the new TP name will be entered at
the bottom of the list. When finished, press ESC. The cursor will now be on the
TP data on the right. Follow steps below.
18