Publicité
Les langues disponibles
Les langues disponibles
3. TO RENAME FAVORITE LIST HEADING
Press FAV and select the heading you wish to rename. Press VOL up / down on ADD and select RENAME. Press OK and menu
below will appear. Proceed as indicated.
NOTE: When adding favorite channels from different satellites, these will be grouped into one list under each favorite heading.
Selecting favorite channels
To select favorite channel, press FAV button. Below channel list will appear.
VCR Timer Settings
You can program your receiver to switch on automatically (from standby) for your VCR. Please refer to your VCR instruction
manual for setting the VCR. You can program up to 10 events to come on at different times. Follow steps below.
Day: Press VOL up / down and select the date you wish the timer to come on.
On Time: Use 0-9 buttons and enter the time it is to come on.
Off Time: Use 0-9 buttons and enter the time it is to switch off.
STORE: Press OK to store above settings.
Repeat the process for rest of the event numbers if you have more than one event to program.
NOTE: If you are setting two or more events within the same day which are switching on one after the other, then there should be
a minimum of one minute difference between the off-time of first event and on-time of second event. See example below.
Event 1: On Time = 15:05, Off Time = 16:05
Event 2: On Time = 16:06, Off Time = 17:05
The receiver will switch on and off at the times stored for each event. After the time has lapsed, it will reset that event to the
All manuals and user guides at all-guides.com
Press CH up / down to move up and down the lines.
Press VOL up / down to move within the line.
Press OK on the letter to enter.
After naming, press ESC. Then select STORE and press OK.
Press VOL up / down to change the list.
Press CH up / down to scroll up and down the list. Press OK on the required
channel.
Press FAV or ESC if you want to quit without selecting any channel.
SYSTEM MENU: VCR TIMER SETTINGS
In the SYSTEM menu, select VCR Timer Settings and press OK.
Event No: Press VOL up / down to change the number.
Timer: Press VOL up / down to turn on the timer.
TV / Radio: Press VOL up / down to select the TV or Radio channel.
Satellite: Press VOL up / down and select the satellite name.
Channel: Use 0-9 buttons and enter the channel number.
Month: Press VOL up / down and select the month you wish the timer to come
on.
15
Publicité
