Fortec Star DVB-786v3 Mode D'emploi page 10

EXAMPLE: London – Longitude = 0 and Latitude = 51,0N
USALS: (Universal Satellites Automatic Location System) Press OK to move the antenna to a predefined satellite position.
0 Position: If you need to move the antenna to 0 position as indicated on the DiSEqC positioner, press OK.
STORE: Press OK to store the above settings.
Automatic scan and search: Multi Satellites
3. Satellite: Press VOL up / down to change the satellite name, and remember that you have to select a different name for each
search index number.
4. Search Mode: Select search type for each satellite you wish to search. See below for types. Press VOL up / down to change
type.
Auto All – To search automatically all TP's for all channels
Auto FTA – To search automatically all TP's for free-to-air channels only
NIT All – To search network index table for all channels
NIT FTA – To search network index table for free-to-air channels only
TP All – To search selected TP's for all channels. To select TP's, move to TP Data and press OK to get the sub menu. Then press OK for the
TP's you wish to search. Press ESC after selecting.
TP FTA – To search selected TP's for free-to-air channels only. To select TP's, move to TP Data and press OK to get the sub menu. Then press
OK for the TP's you wish to search. Press ESC after selecting.
Manual All – To search a single TP for all channels. To select a TP, move to TP Data and press OK to get the sub menu. Press VOL up / down
to change the TP and press OK.
Manual FTA – To search a single TP for free-to-air channels only. To select a TP, move to TP Data and press OK to get the sub menu. Press
VOL up / down to change the TP and press OK.
Repeat steps 1 – 4 for all the satellites you wish to scan and search, then proceed with below.
5. Positioner: Provided that the antenna positioner is already configured, press VOL up / down to change and select DiSEqC
1.3.
6. START: Move down to START and press OK to commence search. Once the antenna has moved to the first satellite (ref:
Search Index 1), the screen will change (illustrated below) showing the TV and Radio channels that are downloading. After
download is complete, it will store automatically and move to the next satellite. When the antenna has stopped moving it will start
search automatically. This process will be repeated automatically for all satellites you have configured.
All manuals and user guides at all-guides.com
(With DiSEqC 1.3 positioner sub menu)
Select CHANNEL SEARCH and move down to the Positioner line. Then press
VOL up / down and select DiSEqC 1.3 and enter your geographical location
referring to the DiSEqC motor instructions and maps.
My Longitude: Enter the numeric value using 0-9 buttons and then use PAGE up
/ down buttons to enter E (East) or W (West) location.
My Latitude: Enter the numeric value using 0-9 buttons and then use PAGE up /
down buttons to enter N (North) or S (South) location.
INSTALL MENU: CHANNEL SEARCH
AUTOMATIC SCAN AND SEARCH: SATELLITE AND TP
If you are using a DiSEqC 1.2 antenna positioner, then you can search and
download up to 20 satellites automatically. Follow the steps below.
1. Search Index: Set index numbers for each satellite you wish to search. Press
VOL up / down to change the number.
2. Antenna: If you are using more than one LNB, select the antenna reference as
configured previously. If you are using one LNB, then this may remain as 1. Press
VOL up / down to change the number or to switch from Off.
10