ResMed Air10 Mode D'emploi page 5

You are now ready to start therapy. For more information, refer to your device User
Guide.
Removing and returning the oximeter adapter and
SD card
1. Remove the sensor from your finger.
2. Unplug your device from the power outlet.
3. Press the release button/s on the side of the oximeter adapter and pull gently
to remove it from the device.
4. Pull the Xpod oximeter out of the oximeter port on the oximeter adapter.
5. Remove the finger sensor cable from the Xpod oximeter.
6. Open the SD card cover and push in the SD card to release it.
7 . Place the SD card in the protective folder and send it back to your care provider
together with the oximeter adapter and this User Guide.
Cleaning and maintenance
If you need to, wipe the outside of the oximeter adapter with a clean, dry cloth.
For instructions on how to clean the oximeter and its sensor, refer to the User
Guide supplied with those accessories.
Troubleshooting
If you have any problems, refer to the following troubleshooting topics. If you are
not able to fix the problem, contact your care provider or refer to
www.resmed.com. Do not try to open the oximeter adapter.
All manuals and user guides at all-guides.com
English 3