ResMed Air10 Mode D'emploi page 4

Associated accessories
• Xpod oximeter
• Xpod fixation clip
• Finger pulse sensor
• Oximetry accessories pack (including Xpod oximeter, Xpod fixation clip and 3m
oximeter soft sensor reusable).
Save the packaging
Keep all the packaging the oximeter adapter came in. You will need to return the
oximeter adapter, this User Guide and the SD card to your care provider.
Setup
Refer to illustration E or F:
1. Unplug your device from the power outlet.
2. Make sure an SD card is inserted into the SD card slot on your device.
3. Connect the oximeter adapter to your device.
4. Align the Xpod oximeter connector with the oximeter adapter port and connect
them.
Not pictured:
5. Connect the Xpod oximeter to the finger pulse sensor.
For instructions refer to the User Guide supplied with the finger pulse sensor.
6. Connect the finger pulse sensor to your finger.
7 . Plug your device back into the power outlet.
The AirSense 10 / AirCurve 10 device will briefly display the oximeter software
code, eg, SX123-4567 .
The S9 device will briefly display Oximeter enabled.
2
All manuals and user guides at all-guides.com