Publicité
Les langues disponibles
Les langues disponibles
Control Panel Features (continued)
Change Filter
Change Filter
When the Change Filter icon turns on, the air filter needs to
be replaced. After replacing the air filter, press and hold the
Fresh Air Filter button for three seconds to turn the icon light
off. It is recommended to change the air filter approximately
every 6 months.
Ice Plus
Ice Plus
This function increases both ice making and freezing
capabilities.
Ice Plus
When you touch the
illuminate in the display and will continue for 24 hours.
The function will automatically shut off after 24 hours.
You can stop this function manually by touching the
button one more time.
Energy Saving
Energy Saving
The Energy Saving function disables the mullion heater
located on the refrigerator door in order to conserve electric-
ity. Press and hold the Energy Saving button for three sec-
onds to activate or deactivate this function.
NOTE
Discontinue using the Energy Saving function if ex-
cessive moisture begins to collect on the door
mullion.
Light
Light
When you press the Light button, the dispenser light will turn
on and the indicator will appear on the LED display.
Change Water Filter
Change Water Filter
When the water filter indicator turns on, you have to change
the water filter. After changing the water filter, press and
hold the Change Filter button for three seconds to turn the
indicator light off. You need to change the water filter ap-
proximately every six months.
[
]
* LFX31925SW
LFX31925SB
button, the graphic will
Door Alarm
Door Alarm
When power is connected to the refrigerator, the door
alarm is initially set to ON. When you press the
Alarm
button, the display will change to OFF and the
Door Alarm
function will deactivate.
When either the refrigerator or the freezer door is left
open for more than 60 seconds, the alarm tone will
sound to let you know that the door is open.
When you close the door, the door alarm will stop.
Control Lock
Control Lock
The Control Lock function disables every other button on the
The Control Lock function disables every other button on the
display.
display.
When power is initially connected to the refrigerator,
Lock
the
function is off.
If you want to activate the
buttons, press and hold the
Lock
onds or more. The
icon will display and the
function is now enabled.
Lock
To disable the
function, press and hold the
button for approximately three seconds.
Power Saving Mode
Power Saving Mode
When the refrigerator is in the
the display will remain off until a door is opened or a
button is pressed. Once on, the display will remain on
for 20 seconds.
25
HOW TO USE
Door
Lock
function to lock other
Lock
button for three sec-
Lock
Lock
Power Saving Mode
,
Publicité
