Publicité
Les langues disponibles
Les langues disponibles
4
Make sure that the door-switch located inside the cover
is tightly connected. Position the cover in its place. Insert
and tighten the cover screw
Assembling the Left Refrigerator Door
Install the left refrigerator door after the right door is installed.
1
Make sure that the plastic sleeve is inserted in the bot-
tom of the door. Install the refrigerator door onto the
middle hinge.
2
Fit the hinge
over the hinge lever latch and slot it into
place. Rotate the lever clockwise
Hinge Lever Latch
.
and fasten the hinge.
3
Connect all the wire harnesses.
4
Push the water supply tube into the hole on the top case
and pull it through the backplate.
5
Hold the water supply connection and gently push in the
collet to connect the water supply line as shown in
. Insert the tube at least
nector. Assemble the clip to the joint part for fastening.
15
INSTALLATION
and
5
/
inch (15 mm) into the con-
8
Collet
Publicité
