Publicité
Les langues disponibles
Les langues disponibles
12
INSTALLATION
Removing/Assembling the Doors
and Drawers
Removing the doors is always recommended when it is nec-
essary to move the refrigerator through a narrow opening.
WARNING
If your entrance door is too narrow for the refrigera-
tor to pass through, remove the refrigerator doors and
move the refrigerator sideways through the doorway.
Use two or more people to remove and install the
refrigerator doors. Failure to do so can result in back or
other injury.
Disconnect the electrical supply to the refrigerator
before installing. Failure to do so could result in serious
injury or death.
Do not put hands, feet or other objects into the air
vents, base grille, or bottom of the refrigerator. You may
be injured or receive an electrical shock.
Be careful when handling the hinge, base grille and
stopper. It may result in injury.
Remove food and bins from the doors and drawers
before detaching.
Removing the Left Refrigerator Door
1
The water supply is connected to the upper right part of
the rear surface of the refrigerator. Remove the ring in the
joint area. Hold the water supply connection and gently
push the Collet to detach the water supply line as shown
in
and
.
NOTE
Detachment of the water supply line is applicable only
when detaching the left refrigerator door.
Collet
2
Remove the
screw from the hinge cover at the top of
the refrigerator. Lift the hook (not visible), located at the
bottom of the front side of the cover
screwdriver.
3
Remove the cover and pull out the tube
wire harnesses
.
4
Rotate the hinge lever counterclockwise
hinge
free of the hinge lever latch.
Hinge Lever Latch
CAUTION
When lifting the hinge free of the latch, be careful that
the door does not fall forward.
with a flat-head
. Disconnect all
. Lift the top
Publicité
