ECOVACS DEEBOT T10 PLUS Manuel D'instructions page 27

No. Malfunction
Air Freshener makes an
17
abnormal noise.
DEEBOT does not respond
18
to the Station instruction.
Driving wheels are
19
blocked.
DEEBOT OZMO™ Pro
3.0 Oscillating Mopping
20
System drops out of the
place during use.
DEEBOT is stuck when
cleaning with OZMO™ Pro
21
3.0 Oscillating Mopping
System installed.
Possible Causes
Objects have fallen into the Air Freshener.
DEEBOT is too far away from the Station.
DEEBOT and the Station are not paired.
Driving wheels are blocked by foreign objects.
The OZMO™ Pro 3.0 Oscillating Mopping
System is not correctly installed.
DEEBOT may have difficulty climbing over
obstacles when using OZMO™ Pro 3.0
Oscillating Mopping System.
Solutions
Please contact Customer Service for assistance.
If it is beyond the available distance, the ECOVACS HOME
App can also be used to operate DEEBOT.
Unplug the Station plug and wait for 10 seconds to reinsert
the plug.
Manually push the robot up to the Station, and ensure
that the charging contacts are correctly connected. Then,
DEEBOT will start charging, and voice prompt pairing
successful.
Please rotate and press the driving wheels to check
whether there is any foreign object wrapped or stuck. If
there is any foreign object, please clean it in time. If this
problem persists, please contact Customer Care for help.
Make DEEBOT OZMO™ Pro 3.0 Oscillating Mopping
System clicks into place when installing.
Please assist DEEBOT if there is a problem.
27 EN