Testing And Maintenance - Abus Rm20 Consignes D'utilisation Et D'installation

IMPoRTANT NoTE:
The smoke alarm is only able to
provide a warning, and potentially
save lives, if it is located in its intend-
ed installation position, is free from
dirt and damage and is activated.

TESTING AND MAINTENANCE

The smoke detector automatically
checks that it is operating correctly
once a minute. It also automatically
readjusts the sensitivity of its detec-
tion optics to suit its environmental
conditions.
Activating the
test tone
MoAnltg RM 20_D_GB_F_NL_I_11.2012.indd 20
All manuals and user guides at all-guides.com
Fig. 5
– 20 –
The unit gives an early warning if its
energy capacity is low or if the detec-
tion optics have become so full of
imperfections that readjustment is
no longer possible. This gives you
sufficient time to replace the smoke
alarm with a new unit.
Please ensure that the air inlets locat-
ed around the edge of the smoke
alarm are never blocked by dust,
dirt, paint of adhesive tape.
You should check that the unit is
functional on a regular basis, at least
once a month, by pressing the test
and stop button (Fig. 5) to activate a
test alarm. Check that the unit is free
from damage, that it is held tightly in
Stop: temporarily
deactivate or disable
the alarm.
Fig. 6
14.11.12