Publicité
Les langues disponibles
Les langues disponibles
OPERATION
FIG. 3
3. Connect the chain to the solution control lever.
Connect the solution feed tube to the solution
supply connector on the machine base (Figure 4).
FIG. 4
WARNING: To reduce the risk of fire, use only
commercially available floor cleaners and waxes
intended for machine operation.
WARNING: Do Not Use Flammable Liquids Or
Operate Machine In Or Near Flammable Liquids,
Vapors Or Combustible Dusts.
This machine is not equipped with an explosion
proof motor. The electric motor will spark upon
start up and during operation which could cause a
flash fire or explosion if machine is used in an
area where flammable vapors/liquids or
combustible dusts are present.
FOR SAFETY: When using machine, follow mixing
and handling instructions on chemical containers.
MACHINE SETUP
INSTALLING PAD DRIVER / PAD / BRUSH
FOR SAFETY: Before leaving or servicing
machine, unplug cord from wall outlet.
12
All manuals and user guides at all-guides.com
1. Pull the handle height adjustment lever and raise
2. Position pad on pad driver. If machine is equipped
NOTE: Consult your authorized distributor for pad and
brush recommendations. Use only manufacturer
supplied or approved pad drivers and brushes.
3. Position the pad driver/brush on the drive motor
4. Return machine to the upright position.
the handle to the upright position. Carefully tilt the
machine backwards and rest the handle on the
floor (Figure 5).
FIG. 5
with plastic centerlock, secure pad with lock
(Figure 6).
FIG. 6
hub and turn it counter-clockwise to engage
(Figure 7).
FIG. 7
Tennant 2100/2120/2130/2140/2150 (10–02)
Publicité
