Publicité
Les langues disponibles
Les langues disponibles
Installation
3.10 Water filter
(in some models)
Your refrigerator may be equipped with an external
or internal filter depending on its model. To fit the
water filter, follow the instructions below referring
to the figures supplied:
3.10.1 Mounting the external
filter onto the wall
1. First, determine the location to mount the
external filter.
2. Then, determine the distance between the
filter and the tap and filter and the water inlet
respectively. Prepare hoses at required lengths.
3. Mount the filter connection kit onto the wall by
using a screwdriver and attach the filter.
B
WARNING:
Water filter must be hold
upright as shown in the figure. It is critical
to connect the water inlet and outlet hoses
on the filter correctly.
Refrigerator / User Manual
All manuals and user guides at all-guides.com
C
B
11 / 31 EN
After connecting the filter, do not
consume the first 10 glasses of water.
WARNING:
Never mount the filter onto
the refrigerator. Coolant pipes might be
pierced!
Publicité
