Beko GNE134751X Mode D'emploi page 10

Installation
3.7 Water connection
Depending on the model of the refrigerator, you
can connect it either to a demijohn or water mains.
First you must connect the water hose to the
refrigerator.
C
In cases where a demijohn is used, a
separate pump must also be used.
A
WARNING:
Refrigerator and the pump, if
any, must be unplugged during connection.
C
Following parts may not be supplied with
your product since they are not required
when using a demijohn.
Check that following parts have been delivered
together with the product:
1. Union for connecting the water hose to the rear
of the refrigerator
2. 3 pieces of pipe clips (used to secure the water
hose)
3. 5-meter long water hose (1/4 inch in diameter)
4. Cold mains water valve with mesh filter (tap
adapter)
5. External water filter. (If there is a demijohn
connection; it is not necessary to use a water
filter.)
3
1
Refrigerator / User Manual
All manuals and user guides at all-guides.com
*5
4
2
9 / 31 EN
3.8 Connecting the water
hose to the refrigerator
1. Slip the union (b) onto the water hose (a).
2. Push the water hose downwards firmly to slip it
onto the water inlet valve (c).
3. Tighten the union (c) by hand to secure it onto
the water inlet valve.
C
Normally, you are not required to tighten
the union with a tool. However, you can use
a spanner or pliers to tighten the union if
there is a leakage.
a
a
b
2
1
c