Genesis GDP500 Manuel D'utilisation page 8

UnPACKing AnD COnTEnT
iMPOrTAnT:
unlikely the tool is faulty or that a part is missing. if you find anything
wrong, do not operate the tool until the parts have been replaced or the
fault has been rectified. Failure to do so could result in serious personal
injury.
Contents in Package: (Fig 2)
item Description
A Head Assembly
B Spindle feed Handles 3
C 1/2" Chuck
D Table Assembly
E Column
f Base
G Chuck Key
H Bolts and Washers 3 Sets
I Allen Wrenches
Operator's Manual (not shown) 1
WArning:
assemble the saw, plug in power cord or turn the switch on until the missing or
damaged parts are replaced.
8" 5-Speed Drill Press
Operator's Manual
Due to modern mass production techniques, it is
QTY
1
1
1
1
1
1
2
if any parts are missing or damaged, do not attempt to
A
C
D
F
H
G
GDP500
E
B
I
Fig 2