Télécharger Imprimer la page

Inventum solo magnetron MN238S Mode D'emploi page 18

Publicité

Les langues disponibles

Les langues disponibles

2
appliance description
7
6
1.
Display
2.
Control panel
3.
Turntable shaft
4.
Turntable ring assembly
5.
Glass tray
6.
Door with handle and safety interlock system
7.
Observation window
3
before first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic bags and cardboard) out of reach of children. Check the appliance after
unpacking for any damage, possible from transportation.
Place the appliance on a flat and stable surface. Make
sure there is enough open space around the appliance
for the intake and/or outlet vents.
The minimum installation height is 85 cm. The rear
surface of the appliance shall be placed against a
wall. Leave a minimum clearance of 30 cm above the
microwave. A minimum clearance of 20 cm is required
between the microwave and any adjacent walls. Do not
remove the feet of the microwave. Blocking the intake
and/or outlet openings can damage the microwave.
Using the microwave may cause interference to your radio or TV reception. Place the microwave therefore as far away from
such devices as possible. Do not place the microwave near a heat source. Clean the microwave and the accessories with a
damp cloth. The appliance is now ready for use. Note: the new appliance can give off a bit of a 'new' smell at the first use, this
is perfectly normal and causes no harm to the appliance. Check that the voltage in your home corresponds with the voltage
printed on the bottom of the appliance and plug it in a socket.
Attention! The wave guide cover inside the microwave divides the microwaves and must never be removed.
18
English
5
4
3
2.1 Function knob
2.2 Turn knob for time/ weight or choosing auto menu
2.3 STOP button
2.4 START/ + 30 SEC-button
1
2
2.1
2.2
2.3
2.4

Publicité

loading