Publicité
Les langues disponibles
Les langues disponibles
14
Starting a programme
1. Press the on/off button to activate the
appliance. Make sure that the
appliance is in programme selection
mode.
2. Close the appliance door.
3. Press Programme again and again
until the indicator of the programme
you want to select comes on.
• If you want to select the
MyFavourite programme, press and
hold Programme until the
MyFavourite setting comes on.
The display shows the programme
duration.
4. Set the applicable options.
5. Press Départ to start the programme.
• The washing phase indicator
comes on .
• The programme duration starts to
decrease with steps of 1 minute.
Starting a programme with
delay start
1. Set a programme.
2. Press Départ Différé again and again
until the display shows the delay time
you want to set (from 1 to 24 hours).
The indicator of the selected programme
flashes.
3. Press Départ.
4. Close the appliance door to start the
countdown.
When the countdown is completed, the
programme starts and the washing phase
indicator comes on.
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for more
than 30 seconds during the
drying phase, the running
programme ends. It does not
happen if the door is opened by
AirDry function.
Do not try to close the
appliance door within 2 minutes
after AirDry automatically
opens it, as this may cause
damage to the appliance.
If, afterwards, the door is
closed for another 3 minutes,
the running programme ends.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you have
to set the programme and options again.
Press and hold simultaneously
Programme and Options until the
appliance is in programme selection
mode.
Cancelling the programme
Press and hold simultaneously
Programme and Options until the
appliance is in program selection mode.
Make sure that there is detergent in the
detergent dispenser before you start a
new program.
End of the programme
When the programme is completed the
display shows 0:00. The phase indicators
are off.
All buttons are inactive except for the
on/off button.
1. Press the on/off button or wait for the
Auto Off function to automatically
deactivate the appliance.
If you open the door before the
activation of Auto Off, the appliance is
automatically deactivated.
2. Close the water tap.
Publicité
