Publicité
Les langues disponibles
Les langues disponibles
Option 4: No waste disposer, no drain air gap
A
NOTE: Attach the drain hose connector to the water waste
line using the supplied hose clamp.
6. Turn on water and check for leaks.
Install Drawer and Trim Pieces
1. Feed hoses and wiring into the cabinet while sliding the
drawer into position.
2. Keep the drawer pulled out about 6" (15.2 cm).
(15.2 cm)
12
Great user manuals database on
A. Drain hose connector
B. Waste
6"
UserManuals.info
3. Place the trim strips on both sides as shown.
B
4. Slide drawer into position.
Publicité
