Round End And Keyhole Buttonholes; Bartacking; Altering The Buttonhole Width - Janome Dc2007Le Livret D'instructions

q w
q
q
q
~
q
~

Round end and keyhole buttonholes

e
Machine Settings
q Stitch pattern: #17 or #18
w Foot:
e Needle thread tension:
The sewing procedure is the same as the square
buttonhole #16.
w
q Starting point
w Bartacking
w

Altering the buttonhole width

Round-end buttonhole
Press the mode key
adjustment.
Press the plus (+) key to increase the buttonhole
width.
Press the minus (–) key to decrease the buttonhole
width.
w
q Narrower buttonhole
w Wider buttonhole
* The width can be altered between 2.5 and 5.5.
Keyhole buttonhole
Press the mode key
adjustment.
Press the plus (+) key to increase the buttonhole
width.
Press the minus (–) key to decrease the buttonhole
width.
w
q Narrower buttonhole
w Wider buttonhole
* The width can be altered between 5.0 and 7.0.
* See page 48 for altering the stitch density.
50
Automatic buttonhole foot R
1–5
to activate the stitch width
to activate the stitch width