VOCO VisCalor Manuel D'utilisation page 33

Radiated RF
IEC 61000-4-3
Table: According to IEC 60601-1-2, Edition 4.0
NOTE: UT is the a.c. mains voltage prior to application of the test level.
NOTE: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects
and people.
a - Field strengths from fixed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radio, AM
and FM radio broadcast and TV broadcast cannot be predicted theoretically
with accuracy. To assess the electromagnetic environment due to fixed RF
transmitters, an electromagnetic site survey should be considered.
If the measured field strength in the location in which the VisCalor®
3 V/m 10V/m
80MHz to 2.5 GHz
Where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter
manufacturer and d is the recommended separation
distance in meters (m). Field strengths from fixed RF
transmitters, as determined by and electromagnetic
site survey (a), should be less than the compliance
level in each frequency range (b). Interference may
occur in the vicinity of equipment marked with the
following symbol.
Dispenser
33