VOCO VisCalor Manuel D'utilisation page 11

The VisCalor® Dispenser is provided non-sterile. There are no special
accessories needed to disinfect the VisCalor® Dispenser heated
composite delivery system.
Quaternary ammonium compound products are recommended
(containing 20% alcohol or less). Wipe, do not spray, solution onto
the unit. Prevent liquids from entering openings on the VisCalor®
Dispenser unit.
DO NOT AUTOCLAVE HANDPIECE.
CHANGEABLE TOPS CAN WITHSTAND AUTOCLAVE - (134°C / 0.22mPA for 5
minutes).
CAUTION:
• DO NOT immerse the unit or unit parts in solutions. Use of
solutions other than those recommended may damage plastic
parts and will void product warranty.
• DO NOT use abrasive material such as scouring powder, organic
solvents, or solvent-based cleaning fluids. In case of severe
contamination, gently clean the device by using diluted alcohol.
• Store the device in the box if it is not to be used for an extended
period of time.
Dispenser
11