Hikmicro PocketE Serie Guide De Démarrage Rapide page 9

sunlight.
● DO NOT swallow the battery to avoid chemical burns.
● DO NOT place the battery in the reach of children.
● When the device is powered off and the RTC battery is full, the time
settings can be kept for 6 months.
● In the first use, charge the device for more than 2.5 hours in the
power-off status.
● The battery voltage is 3.85 V, and the battery capacity is 2100 mAh.
● The battery is certified by UL2054.
Maintenance
● If the product does not work properly, please contact your dealer or the
nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.
● A few device components (e.g., electrolytic capacitor) require regular
replacement. The average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
● Wipe the device gently with a clean cloth and a small quantity of ethanol,
if necessary.
● If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the device may be impaired.
Calibration Service
● We recommend you send the device back for calibration once a year, and
please contact the local dealer for the information on maintenance points.
For more detailed calibration services, please refer to
https://www.hikmicrotech.com/en/support/calibration-service.html
Using Environment
● DO NOT expose the device to extremely hot, cold, dusty, corrosive,
saline-alkali, or damp environments. Make sure the running environment
meets the requirement of the device. The operating temperature shall be
-10 °C to 50 °C (14 °F to 122 °F), and the operating humidity shall be 95%
or less.
● Place the device in a dry and well-ventilated environment.
● DO NOT expose the device to high electromagnetic radiation or dusty
environments.
● DO NOT aim the lens at the sun or any other bright light.
● When any laser equipment is in use, make sure that the device lens is not
exposed to the laser beam, or it may burn out.
● The device is suitable for indoor and outdoor uses, but do not expose it in
wet conditions.
● The level of protection is IP 54.
● The pollution degree is 2.
Technical Support
● https://www.hikmicrotech.com/en/contact-us.html
as a HIKMICRO customer to get the most out of your HIKMICRO products.
The portal gives you access to our support team, software and
documentation, service contacts, etc.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang
District, Hangzhou, Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to
export controls in various countries or regions, including without limitation,
the United States, European Union, United Kingdom and/or other member
countries of the Wassenaar Arrangement. Please consult your professional
legal or compliance expert or local government authorities for any
necessary export license requirements if you intend to transfer, export,
re-export the thermal series products between different countries
7
portal will help you