Beko BS 107 CN Manuel D'utilisation page 27

5 Installation and adjustment
Note:
C
1. The flat end of the exhaust pipe joints must be snapped into place.
2. The pipe cannot be distorted nor has substantial turning (greater than 45 °). Keep
the ventilation of the exhaust pipe not blocked.
3. Install the body
1) Move the machine with installed heat pipe and fittings before the window, and the distance
between the body and walls or other objects shall be least 50 cm (as shown in Fig. 4).
2) Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints into the hole of the
window sealing plate assembly (as shown in Fig. 5 and Fig. 6) .
Local air conditioner / User Manuel
Fig. 2
Min: 50cm
Fig. 4
Fig. 3
Min: 50cm
27 / 76 EN