Publicité
Les langues disponibles
Les langues disponibles
Fig. 5
1
2
3
Fig. 6
06.14
It is possible to adjust how tightly the staples are clos-
ing.
–
With a 3 mm Allen key turn the adjusting screw
(Fig. 5/1). Turn clockwise for a stronger
clinch. Turn the adjusting screw anti clock wise
to open up the clinch
1
1 Good clinch.
2 Leg length of the staple too long or over bended.
3 Leg length of staple too short or not enough
bended.
If necessary adjust staple clinch, see chapter 5.3.
Josef Kihlberg a.560M
5.3 ADJUST STAPLE CLINCH
Be sure that the tool is not pointing at
yourself or anyone else when connec-
ting it to the compressed air line.
more.
5.4 CONTROL THE CLINCH
Always use Josef Kihlberg original
staples: JK560-15 or JK560-18.
7
Publicité
