Hitachi DH 24PF Mode D'emploi Et Instructions De Securite page 25

9. Drilling holes (Rotation only)
Drill chuck (13VLD–D)
(includes chuck wrench)
Code No. 321813
Chuck wrench
1/2" (13 mm) drill chuck ass'y (includes chuck wrench) and chuck (for drilling
into steel or wood)
10. Driving Screws (Rotation only)
Phillips Driver Bit
Bit No.
No. 2 1/8" ~ 3/16" (3 – 5 mm)
No. 3 1/4" ~ 5/16" (6 – 8 mm)
11. Dust cup, Dust collector (B)
Dust cup
Code No. 971787
12. Hammer grease A
1.1 lbs. (500 g) (in a can) Code No. 980927
0.15 lbs. (70 g) (in a green tube) Code No. 308471
0.07 lbs. (30 g) (in a green tube) Code No. 981840
NOTE:
Specifications are subject to change without any obligation on the part of the
HITACHI.
Chuck adaptor (D)
(SDS-plus shank)
Code No. 303624
Bit No. Chuck adaptor (D)
(SDS-plus shank)
Code No. 303624
Screw Size
Dust collector (B)
Code No. 306885
Length
1" (25 mm)
1" (25 mm)
English
Code No.
971511Z
971512Z
25