Télécharger Imprimer la page

ADE WS 1502 Mode D'emploi page 59

Avec capteur extérieur sans fil

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 116
Choosing a location
General
The base station and outdoor sensor exchange data over a
radio frequency. Location is therefore a determining factor
for the range of the wireless connection.
Pay attention to the following:
‚ The maximum distance between the base station
‚ Protective construction materials such as reinforced
‚ Devices such as TVs, cordless phones, computers, and
‚ Do not place the base station and the outdoor sensor
Weather Station with Wireless Outdoor Sensor WS 1502/1503
FW Station.indb 59
NOTE on material damage
‚ Protect the base station and wireless sensor
from dust, impacts, extreme temperatures
and direct sunlight.
‚ Protect the base station from moisture.
Position the base station exclusively in a dry,
closed room. The wireless sensor is protected
against moisture, but must be protected
from direct exposure to moisture, e.g. rain.
and the outdoor sensor is 60 metres. This range is,
however, only possible with "direct line of sight".
concrete reduce or inhibit signal reception between
the base station and outdoor sensor.
fluorescent tubes can likewise disrupt signal reception.
directly on the ground. This limits the range.
59
21.09.2015 09:45:59

Publicité

loading

Ce manuel est également adapté pour:

Ws 1503