Beurer HK 47 Mode D'emploi page 5

3. The Power Bank is fully charged when the Battery Level LED stops flashing and displays steadily (about
4.5 hours for a completely discharged Power Bank).
4. Disconnect the Charging Cable; the LED will shut off. Charge the Power Bank at least once per year to
maintain its capacity.
WARNING
• While charging, do not cover the Power Bank. Only charge the Power Bank in a dry environment at
normal room temperature.
Charging other devices from the Power Bank
The Power Bank can also be used to charge other rechargeable
devices, such as smartphones. To charge your device using the
power bank, simply connect your device's USB cable to the Power
Bank and to the USB port on your device.
5. To Use
1. Connect the integrated Power Cable on the heating seat with the USB Power Socket on the Power Bank;
the Power Button will flash white three times, indicating the device is ready for use.
2. Press the Power Button on the heating seat to activate; the Power Button will illuminate in green indicat-
ing the device is on Low. The power bank's LED illuminates or flashes white, according to the charging
level of the power bank.
CAUTION
• Ensure that the heating seat does not bunch up or fold over during use.
3. To increase the heat level, press the Power Button again; the Power Button will illuminate yellow to
indicate the medium setting. Press a third time to increase to maximum heat; the Power Button will
illuminate red.
4. To shut off the heating seat, press the Power Button again. The LED on the heating seat will shut off
immediately, the LED on the power bank after a few seconds.
WARNING
• If the heating seat is being used over several hours, set the lowest temperature setting on the
Power Bank to avoid overheating the heated body part, which may lead to burns to the skin.
NOTICE: Protect the Power Bank from extreme cold to maintain its performance.
NOTE
• When the Power Bank level is too low, the heating seat will shut off. The Power Bank must then
be charged before using it again.
5